为合理选择大型地下水封洞库施工爆破方式, 采用爆破试验的方法, 结合爆破振动测试、爆前爆后声波检测、爆后宏观调查等手段, 比较分析了深孔台阶爆破+预裂爆破和水平浅孔爆破+光面爆破2种爆破方案的优劣。分析可知深孔台阶爆破+预裂爆破方案下爆破振动及围岩损伤均大于水平浅孔爆破+光面爆破, 但仍在可控的范围内, 二者均满足地下水封洞库开挖轮廓面成形的要求。故深孔台阶爆破+预裂爆破方案可用于大型地下水封洞库的开挖, 但需要严格控制钻孔精度、单段起爆药量、药包直径以及装药结构;水平浅孔爆破+光面爆破方案适合在岩体性质较差或爆破振动控制相对较严格的开挖区域中采用。
Abstract
The selection of a reasonable blasting method is one of the key issues in the construction of large underground water-sealed caverns. Through field blasting test, blasting vibration monitoring, sound wave detection before and after blasting, as well as macroscopic investigation after blasting, we compared and analyzed the advantages and disadvantages of two blasting methods: deep hole bench blasting plus pre-splitting blasting, and horizontal shallow hole blasting plus smooth blasting. Results indicate that the blasting vibration and surrounding rock damage of the former method are greater than those of the latter, but still in controllable range and both methods meet the requirements of underground water-sealed cavern excavation molding. It’s concluded that the former method can be used for the excavation of large underground water-sealed caverns, but the drilling accuracy, single delay charge weight, charge diameter and charge structure should be strictly controlled. The latter method suits the excavation which requires strict control of blasting vibration or with poor rock mass .
关键词
地下洞室群 /
水封 /
爆破方式 /
预裂爆破 /
光面爆破
Key words
underground cavern group /
water-sealed /
blasting method /
pre-splitting blasting /
smooth blasting
{{custom_sec.title}}
{{custom_sec.title}}
{{custom_sec.content}}
参考文献
[1] 蒋 健, 周 宇, 孙 文. 大型洞室群开挖爆破技术[J]. 工程爆破, 2003, 9(1):38-42.(JIANG Jian, ZHOU Yu, SUN Wen. Blasting Techniques for Excavation of Large-scale Underground Tunnels and Chambers [J]. Engineering Blasting, 2003, 9(1):38-42.(in Chinese))
[2] 李友华, 黄应军, 李景元. 溪洛渡水电站左岸地下厂房大跨度高边墙开挖施工技术[J]. 水力发电, 2008, 34(9):9-12. (LI You-hua, HUANG Ying-jun, LI Jing-yuan. Excavation Techniques of Large-span and High Sidewall of Left-bank Underground Powerhouse of Xiluodu Hydropower Station[J]. Water Power, 2008, 34(9): 9-12. (in Chinese))
[3] 陈仁峰, 郑 平, 张晓林. 瀑布沟水电站大型地下厂房快速开挖施工技术研究[J]. 四川水力发电, 2008, 27(12):35-39. (CHEN Ren-feng, ZHENG Ping, ZHANG Xiao-lin. Study for Rapid Excavation Construction Technique of Large-scale Underground Powerhouse about Pubugou Hydropower Station[J]. Sichuan Water Power, 2008, 27(12):35-39.(in Chinese))
[4] 卢文波, 耿 祥, 陈 明, 等. 深埋地下厂房开挖程序及轮廓爆破方式比选研究[J].岩石力学与工程学报, 2011, 30(8):1532-1539. (LU Wen-bo, GENG Xiang, CHEN Ming, et al. Study of Selection of Excavation Procedure and Contour Blasting Method for Deep Underground Powerhouse[J]. Chinese Journal of Rock Mechanics and Engineering, 2011, 30(8):1532-1539. (in Chinese))
[5] 王者超, 李术才, 吕晓庆, 等.地下水封石油洞库施工期围岩完整性参数敏感性分析[J].岩石力学, 2011, 32(2):489-495. (WANG Zhe-chao, LI Shu-cai, LV Xiao-qing, et al. Parameter Sensitivity of Rock Mass Integrity for a Pilot Underground Crude Oil Storage Caverns During Construction Phase[J]. Rock and Soil Mechanics, 2011, 32(2):489-495. (in Chinese))
[6] 卢文波. 三峡工程临时船闸与升船机开挖中的爆破方案优化和爆破振动控制[J]. 岩石力学与工程学报, 1999, 18(5):516-519.(LU Wen-bo. Optimization of Blasting Procedure and Vibration Control During Excavation of Temporary Ship Lock and Ship Lift in Three Gorges Project[J]. Chinese Journal of Rock Mechanics and Engineering, 1999, 18(5):516-519.(in Chinese))
[7] 张正宇, 张文煊, 吴新霞, 等. 现代水利水电工程爆破[M]. 北京:中国水利水电出版社, 2003.(ZHANG Zheng-yu, ZHANG Wen-xuan, WU Xin-xia, et al. Modern Blasting for Water Resources and Hydropower Engineering[M]. Beijing: China Water Power Press, 2003. (in Chinese))
基金
国家自然科学基金资助项目(51309026)
PDF(1919 KB)
